Custom Carbon Fiber Side Skirts — In Stock, or Built on Existing Molds
371+ existing side skirt molds covering BMW, Mercedes-Benz, Audi, Porsche and more. Lower the visual beltline and tie the front lip to the rear diffuser — sold and shipped in pairs. No tooling fee on catalog designs — pick your material, weave, color and finish. Need something that doesn't exist yet? We develop new molds from your drawings or a 3D scan.
371 side skirt designs with existing molds — filter by your brand. Every catalog piece can be customized in material, weave, color and finish with no tooling fee. Don't see your model? We build new molds from your drawings or a 3D scan.
Retail $350–$1,100 elsewhere. Factory-direct pricing depends on which of the three paths fits your project.
📦 In Stock
3–7 days
Ships from US / EU warehouse
Single piece or combined parcels
Live stock & regional price confirmed before ordering
Most Popular
🎨 Existing Mold
$150–$450 / pair
No tooling fee — mold already exists
Custom weave, color & finish
Production 7–15 days after order
🛠️ New Mold
Tooling $800–$2,000
Full custom development from your drawings
First sample in 45–58 days
Recommended batch: 20 pcs — lowest unit cost
🚢 Side skirts ship in pairs in long reinforced cartons with foam separation. Sea freight is the default for batches; air freight available for urgent sets.
Why Carbon Fiber Side Skirts — and What to Look For
Side skirts close the gap between front lip and rear diffuser, lowering the visual beltline and smoothing airflow along the flanks. A car with a lip but no skirts looks unfinished — skirts are what make an aero set read as one design.
Length and rocker-panel contour are the fitment traps. Our molds are laid up per rocker variant, with reinforced mounting flanges and multi-layer UV-stable clear coat as standard.
Sold in pairs
Left and right from matched molds — weave direction mirrored
Rocker-variant fitment
Molded to the specific rocker panel contour of each model
UV-stable clear coat
Anti-yellowing formula, standard on all exterior parts
Customization
What You Can Customize on Side Skirts
OEM+ vs Extended
Subtle rocker extensions or wide blades that connect to widebody arches on styled molds.
With or Without Side Extensions
Add rear side extensions to bridge into the diffuser for a full-length look.
Kit Matching
Weave, color and finish matched to your front lip and diffuser when ordered as a set.
Wet vs Dry Carbon
Wet carbon for street builds and value; prepreg dry carbon for track cars.
Weave & Color
2×2 twill, 1×1 plain, forged carbon, Kevlar blends — matched across the full kit.
Finish
High-gloss or matte/satin clear coat. Gloss shows the weave deepest; matte suits wrapped or stealth cars.
Before You Order
Fitment, Installation & Safety Notes
Installation: skirts bond and screw along the rocker panel — 3M tape plus self-tapping screws into factory pinch welds, typically 30–45 minutes per side. A lift or ramps help a lot.
Jack point note: extended blades sit near factory jack points on some models. We mark the safe lift zones in the install sheet where the design requires it.
Paint & PPF: clear-coated carbon can be PPF-wrapped like paint — skirts live in the stone-chip zone, PPF is recommended. If you plan to paint, order the matte finish for best adhesion prep.
Yes — always left and right together, from matched molds with mirrored weave direction. Pricing is per pair.
Is drilling required?
Most designs use 3M tape plus self-tapping screws into the factory pinch weld — no structural drilling. The screws are hidden on the underside.
Will they work with my front lip and diffuser?
That is the idea — skirts bridge the two. Order as a set and we match weave, color and finish across all pieces in one production run.
Which models already have molds?
116 models across 28 brands — BMW, Mercedes-Benz, Audi, Volkswagen, Ford and more. Filter the catalog above, or send us your model and we will confirm within 12 hours.
How are side skirts shipped?
In pairs, in long reinforced cartons with foam separation between the pieces. Sea freight default for batches; air for urgent sets.
What is the MOQ for existing-mold customization?
No strict MOQ on catalog designs — one pair is fine. Best unit cost starts around 20 pairs, and mixed parts count toward the batch.
116 Models Already Have Side Skirts Molds. Is Yours One of Them?
Send us your brand, model and year — we confirm mold availability and pricing within 12 hours. No mold? New tooling starts at $800–$2,000.
