OEM · ODM · Private Label

OEM, ODM & Private Label Carbon Fiber Car Parts

Put your brand on factory-direct carbon fiber. Manufacture your own designs with us, adapt our existing molds to your spec, or start with private-label branding on proven parts — with NDA protection, exclusive tooling options, and engineering support from a factory building carbon fiber since 2007.

Start Your Program Compare the Three Paths

Since 2007 Factory Direct IATF 16949 / ISO 9001 NDA Before Drawings Samples From 1 Piece

Cooperation Models

Three Ways to Build Your Brand — One Factory

OEM, ODM, and private label overlap in practice, so we define them the way buyers actually use them. Most partners start with one model and grow into another.

OEM manufacturing of customer-designed carbon fiber car parts in production

OEM — Your Design, Our Factory

You bring drawings, samples, or a specification; we handle engineering, tooling, and manufacturing under your brand. Best for established brands and product developers with their own designs — see Custom Development.

ODM — Our Designs, Your Direction

Choose from our existing designs and molds, then customize weave, finish, and fitment details to your spec. No designer on your side? Our Europe and North America creative design resources support concept, 3D modeling, and rendering.

Private label packaging prepared for branded carbon fiber car parts

Private Label — Proven Parts, Your Branding

Start with catalog parts carrying your logo, labels, and packaging — the fastest route to a branded product line with minimal upfront cost. Many partners begin here and grow into ODM or OEM programs.

Side by Side

Three Cooperation Paths, Compared

Every program is quoted individually, but the trade-offs between the three paths are consistent.

	Path A — Catalog As-Is	Path B — Existing Mold, Your Spec	Path C — Full Custom Development
What you get	Proven parts from our existing molds, ready to brand and ship	Our molds with your weave, finish, logo, and packaging	Exclusive parts engineered from your drawings or samples
Tooling fee	None — molds already exist	None — molds already exist	New tooling required, always quoted and agreed upfront
Typical quantity	Samples from 1 piece; scale as you sell	Production runs from around 20–30 pieces	Initial production typically 30–100 units
Timeline	Fastest — stock and short-cycle production	Fast — no tooling phase, production on order	Prototype in about 45–58 days after drawings are confirmed
Exclusivity	Shared designs, your branding	Your spec and branding on our molds	Full design and mold exclusivity available by agreement
Best for	Sellers testing the market or launching quickly	Brands differentiating on spec without tooling cost	Brands building a protected, exclusive product line

Want to start even smaller? Our dropshipping program lets you sell under your name with no inventory. Still comparing factories? Read our buyer’s guide to choosing a carbon fiber supplier.

MOQ & Tooling

Order Quantities and Mold Ownership, in Plain Terms

The two questions every brand asks before committing — answered the same way we answer them in a quote.

Quotation prepared for an OEM carbon fiber parts program

MOQ & Sampling

Samples start from a single piece so you can verify quality first. Standard production MOQ starts around 20–30 pieces; custom-mold programs typically begin with an initial run of 30–100 units. Very small runs can be reviewed separately with adjusted pricing.

In-house mold tooling for exclusive OEM carbon fiber parts

Mold Ownership & Exclusivity

Molds stay in our factory — we store, maintain, and refurbish them in-house at no storage cost to you. An exclusivity agreement means your mold is used only for your orders, and your design is never offered to other buyers. Details: Carbon Fiber Tooling.

Quality inspection keeping re-ordered carbon fiber parts consistent across batches

Mold Life & Re-Orders

Wet carbon molds typically serve 100–200 parts; prepreg tooling runs 300+ cycles. Re-orders run from the same mold and process documentation, so fit and finish stay consistent batch after batch — with 98% on-time delivery.

IP & Brand Protection

Your Design Stays Yours

Original designs and brand assets are protected by contract and by process — not by promises.

NDA signed before exchanging carbon fiber part design drawings

How We Protect Your Program

NDA signed before detailed drawings change hands
Project ownership and tooling use rights defined in the contract
Exclusive molds used only for your orders
Confidentiality requirements across engineering and production
Your designs are never offered or sold to other buyers

IATF 16949 and ISO 9001 certified carbon fiber manufacturing process control

Certified Process Control Behind It

Protection only works when the process is disciplined. Our factory runs IATF 16949 and ISO 9001 quality systems with CE-certified products, in-house tooling, and documented QC gates at every stage — see how it works in Mass Production and About JC AUTOCARBON.

Branding Options

Six Ways to Put Your Brand on the Part

The right method depends on finish requirements, durability needs, MOQ, and production process — we recommend one per program.

Surface Decals

Cost-effective and easy to apply — a practical starting point for private-label runs and lower volumes.

Under-Clear-Coat Logos

The premium option: your logo sealed under the clear coat for a factory look with durable protection.

Engraving

Permanent and tactile — branding that cannot peel, fade, or be removed.

Mold Marking

Your mark embedded directly into the part from the tooling itself — ideal for exclusive ODM and OEM programs.

Custom Labels

Product and packaging labeling with your part numbers, barcodes, and brand information.

Custom Packaging

The full private-label experience — branded boxes, inserts, and documentation your customer sees first.

Branding is confirmed at the quotation stage together with MOQ and finish, so there are no surprises at production.

The Process

From First Message to First Delivery

A typical program — whether private label, ODM, or full OEM — moves through four stages.

1

Send Your Requirements

Drawings, samples, or just an idea — we reply within 12 hours. An NDA can be signed before detailed drawings change hands.

2

Engineering Review & Quote

We review structure, material, and mold feasibility, then issue a project-based quotation covering tooling, unit price, MOQ, and timeline.

3

Prototype & Validation

For new designs, a first sample is typically ready in about 58 days after design confirmation, with fitment verified on the vehicle — see Rapid Prototyping.

4

Production & Delivery

Batch production with documented QC, branded packaging, and EXW, FOB, or DDP shipping agreed in writing — see Shipping & Delivery.

FAQ

OEM, ODM & Private Label Questions, Answered

What is the difference between OEM, ODM, and private label?

With OEM, you bring the design and we manufacture it under your brand. With ODM, you start from our existing designs and molds and customize them to your specification. Private label means proven parts carrying your logo, labels, and packaging. In practice the models overlap, and many partners move from private label to ODM or OEM as volume grows.

What is the MOQ for OEM, ODM, or private label orders?

Samples start from a single piece so you can verify quality first. Standard production MOQ starts around 20–30 pieces, and custom-mold programs typically begin with an initial run of 30–100 units. Very small runs can be reviewed separately with adjusted pricing.

Who owns the mold, and can it be exclusive to us?

Molds stay in our factory, where we store, maintain, and refurbish them in-house — there is no storage cost to you. An exclusivity agreement means your mold is used only for your orders, and your design is never offered to other buyers. Wet carbon molds typically serve 100–200 parts; prepreg tooling runs 300+ cycles.

How do you protect our designs and brand?

We sign an NDA before detailed drawings change hands, define project ownership and tooling use rights in the contract, and apply confidentiality requirements across engineering and production. Your designs are never offered or sold to other buyers.

What branding options are available for private label parts?

Six methods: surface decals, under-clear-coat logos, engraving, mold marking, custom labels, and custom packaging. The best choice depends on finish requirements, durability needs, MOQ, and production process — we recommend one per program at the quotation stage.

How long does it take from first contact to first delivery?

We reply to every inquiry within 12 hours. Private label and existing-mold programs move fastest because there is no tooling phase. For new custom designs, the first sample is typically ready in about 58 days after design drawings are confirmed; complex projects may take longer, and the timeline is always confirmed in your quote.

How do we start an OEM, ODM, or private label program?

Send us your drawings, samples, or product idea together with your target quantities and market through the inquiry form below. We come back with a project-based quotation covering tooling if needed, unit pricing, MOQ, branding options, and timeline.