Custom Carbon Fiber Fog Lamp Covers — In Stock, or Built on Existing Molds
63+ existing fog lamp cover molds covering BMW, Mercedes-Benz, Audi, Porsche and more. Bezels and deletes that clean up the bumper face — pairs molded per bumper variant. No tooling fee on catalog designs — pick your material, weave, color and finish. Need something that doesn't exist yet? We develop new molds from your drawings or a 3D scan.
32+Existing fog lamp cover molds by model
7–15 daysProduction on existing molds
45–58 daysFirst sample on new tooling
12 hrsEngineering reply time
Find Fog Lamp Covers With an Existing Mold
63 fog lamp cover designs with existing molds — filter by your brand. Every catalog piece can be customized in material, weave, color and finish with no tooling fee. Don't see your model? We build new molds from your drawings or a 3D scan.
Pricing
How Much Is a Carbon Fiber Fog Lamp Covers?
Retail $50–$300 elsewhere. Factory-direct pricing depends on which of the three paths fits your project.
📦 In Stock
3–7 days
- Ships from US / EU warehouse
- Single piece or combined parcels
- Live stock & regional price confirmed before ordering
Most Popular
🎨 Existing Mold
$25–$120 / pair
- No tooling fee — mold already exists
- Custom weave, color & finish
- Production 7–15 days after order
🛠️ New Mold
Tooling $500–$1,500
- Full custom development from your drawings
- First sample in 45–58 days
- Recommended batch: 20 pcs — lowest unit cost
🚢 Fog lamp covers ship in pairs in padded cartons. Batch orders consolidate; air freight is economical at this size.
📄 Read the full carbon fiber fog lamp covers pricing guide — retail vs factory vs tooling →Why Carbon
Why Carbon Fiber Fog Lamp Covers — and What to Look For
Fog lamp covers frame the busiest corner of the front bumper — bezels that dress the lamp, or delete plates that clean the face on track cars. Either way, they change what the bumper reads as from ten meters.
Bumper variants are the fitment trap here: the same model can carry three different fog bezels across trims. Our molds are cut per bumper variant, with the same UV-stable clear coat as our largest panels.
Sold in pairs
Left and right, weave matched and mirrored
Bumper-variant molds
Cut per trim and facelift — not universal fit
UV-stable clear coat
Same anti-yellowing formula as our largest panels
Customization
What You Can Customize on Fog Lamp Covers
Bezels vs Deletes
Dress the factory fog lamp with a carbon bezel, or delete the lamp entirely with a smooth plate.
Duct Options
Selected molds offer open duct versions feeding brake or oil coolers on track builds.
Front-End Bundles
Matched with lips, canards and grilles in one weave and finish.
Wet vs Dry Carbon
Wet carbon for value; prepreg dry carbon for the crispest weave.
Weave & Color
2×2 twill, 1×1 plain, forged carbon, Kevlar blends — matched to your other parts.
Finish
High-gloss or matte/satin clear coat. Gloss shows the weave deepest; matte suits stealth cars.
Before You Order
Fitment, Installation & Safety Notes
Installation: bezels clip or tape over the factory surround — ten minutes per side. Deletes may need the fog lamp unplugged or removed; a trim tool is the only tool required on most models.
Variant check: fog bezels change across trims and facelifts on the same model. Send a bumper photo if unsure — we confirm the variant before production.
Paint & PPF: clear-coated carbon can be PPF-wrapped like paint — these live in the stone-chip zone, PPF is recommended. Order matte if you plan to paint.
📖 Browse all carbon fiber installation guides →Three Ways to Work With Us
Pick the Path That Fits Your Business
01
In-Stock Products
Overseas warehouse, ready to ship. Single piece or many — we pack and hand over to the carrier.
02
Made From Existing Molds
No tooling fee. Customize material, weave, color and finish on any catalog fog lamp covers; production starts on order.
Browse the 63 designs above ↑03
New Mold Development
OEM / ODM from your drawings or 3D scan. MOQ from 20 units per part; private label available.
See the development process →FAQ
Carbon Fiber Fog Lamp Covers Questions
Bezel or delete — what is the difference?
Bezels frame and keep the factory fog lamp; deletes replace the lamp with a smooth carbon plate. Deletes suit track cars that remove the lamps.
Will it fit my bumper variant?
Molds are cut per bumper variant and facelift. Send us a photo of your bumper corner and we will confirm the correct mold before production.
Do deletes affect the fog lamp wiring?
The lamp unplugs and the connector ties back safely. It is fully reversible — the factory lamp goes back in any time.
Which models already have molds?
32 models across 7 brands — BMW, Mercedes-Benz, Audi, Honda and more. Filter the catalog above, or send us your model and we will confirm within 12 hours.
How are fog lamp covers shipped?
In pairs in padded cartons, consolidated for batches. Air freight is economical at this size.
What is the MOQ for existing-mold customization?
No strict MOQ on catalog designs — one pair is fine. Best unit cost starts around 20 pairs, and mixed parts count toward the batch.
32 Models Already Have Fog Lamp Covers Molds. Is Yours One of Them?
Send us your brand, model and year — we confirm mold availability and pricing within 12 hours. No mold? New tooling starts at $500–$1,500.
Start Your Project
Get a Fog Lamp Covers Quote in 12 Hours
Tell us your vehicle — our engineering team confirms mold availability, pricing and lead time.
Factory-Direct Carbon Fiber,
Built for You
Custom parts engineered and manufactured in-house — from one-off samples to bulk orders.
19+ Years Manufacturing
1,000 Parts / Day Capacity
Reply within 12 Hours
Free quote · No obligation · Takes about 1 minute
In a hurry? Chat on WhatsApp →
Working hours: Monday – Saturday, 9:00 – 18:00 (GMT+8)