Custom Carbon Fiber Eye Lids — In Stock, or Built on Existing Molds
46+ existing eye lid molds covering BMW, Mercedes-Benz, Audi, Porsche and more. Headlight brows that sharpen the whole front end — the five-minute carbon upgrade. No tooling fee on catalog designs — pick your material, weave, color and finish. Need something that doesn't exist yet? We develop new molds from your drawings or a 3D scan.
30+Existing eye lid molds by model
7–15 daysProduction on existing molds
45–58 daysFirst sample on new tooling
12 hrsEngineering reply time
Find Eye Lids With an Existing Mold
46 eye lid designs with existing molds — filter by your brand. Every catalog piece can be customized in material, weave, color and finish with no tooling fee. Don't see your model? We build new molds from your drawings or a 3D scan.
Pricing
How Much Is a Carbon Fiber Eye Lids?
Retail $50–$300 elsewhere. Factory-direct pricing depends on which of the three paths fits your project.
📦 In Stock
3–7 days
- Ships from US / EU warehouse
- Single piece or combined parcels
- Live stock & regional price confirmed before ordering
Most Popular
🎨 Existing Mold
$25–$120 / pair
- No tooling fee — mold already exists
- Custom weave, color & finish
- Production 7–15 days after order
🛠️ New Mold
Tooling $500–$1,500
- Full custom development from your drawings
- First sample in 45–58 days
- Recommended batch: 20 pcs — lowest unit cost
🚢 Eye lids ship in pairs in flat padded cartons. Batch orders consolidate into master cartons; air freight is economical at this size.
📄 Read the full carbon fiber eye lids pricing guide — retail vs factory vs tooling →Why Carbon
Why Carbon Fiber Eye Lids — and What to Look For
Eye lids — headlight brows — are the smallest aero-styling part with the biggest face change. Two slim pieces above the headlights sharpen the whole front end, and they photograph extremely well, which is why they sell.
Because they sit on the most-visited panel of the car, edge finish and tape quality matter. Ours are molded thin with hand-finished edges, ship with genuine 3M VHB, and get the same UV-stable clear coat as our largest panels.
Sold in pairs
Left and right, weave matched and mirrored
Five-minute install
Genuine 3M VHB — no tools, no drilling
UV-stable clear coat
Same anti-yellowing formula as our largest panels
Customization
What You Can Customize on Eye Lids
Slim vs Aggressive Brows
Subtle OEM+ lines or deep aggressive brows that change the headlight expression.
Facelift Variants
Molds per headlight variant — pre- and post-facelift differ on many models.
Front-End Bundles
Matched with grilles, lips and mirror covers in one weave and finish.
Wet vs Dry Carbon
Wet carbon for value; prepreg dry carbon for the crispest weave.
Weave & Color
2×2 twill, 1×1 plain, forged carbon, Kevlar blends — matched to your other parts.
Finish
High-gloss or matte/satin clear coat. Gloss shows the weave deepest; matte suits stealth cars.
Before You Order
Fitment, Installation & Safety Notes
Installation: five minutes per side — clean the headlight edge with isopropyl alcohol, test-fit, then bond with the pre-applied 3M VHB. No tools, no drilling, fully reversible.
Facelift check: headlight shapes change between facelifts on many models. Confirm your model year or send a photo when ordering.
Paint & PPF: clear-coated carbon can be PPF-wrapped like paint. If you plan to paint-match the brows, order the matte finish for best adhesion prep.
📖 Browse all carbon fiber installation guides →Three Ways to Work With Us
Pick the Path That Fits Your Business
01
In-Stock Products
Overseas warehouse, ready to ship. Single piece or many — we pack and hand over to the carrier.
02
Made From Existing Molds
No tooling fee. Customize material, weave, color and finish on any catalog eye lid; production starts on order.
Browse the 46 designs above ↑03
New Mold Development
OEM / ODM from your drawings or 3D scan. MOQ from 20 units per part; private label available.
See the development process →FAQ
Carbon Fiber Eye Lids Questions
Do eye lids affect the headlights?
No — they bond to the upper headlight edge, clear of the beam pattern and any washer or sensor function.
Will the tape hold in car washes?
Yes — genuine 3M VHB, the same class OEMs use for exterior trim. Surface prep is what makes it permanent.
Are they reversible?
Yes — VHB releases with heat and fishing line, no damage to the headlight lens. Install is fully reversible.
Which models already have molds?
30 models across 12 brands — BMW, Mercedes-Benz, Audi, Volkswagen and more. Filter the catalog above, or send us your model and we will confirm within 12 hours.
How are eye lids shipped?
In pairs, flat-packed in padded cartons. Air freight is fast and economical at this size.
What is the MOQ for existing-mold customization?
No strict MOQ on catalog designs — one pair is fine. Best unit cost starts around 20 pairs, and mixed parts count toward the batch.
30 Models Already Have Eye Lids Molds. Is Yours One of Them?
Send us your brand, model and year — we confirm mold availability and pricing within 12 hours. No mold? New tooling starts at $500–$1,500.
Start Your Project
Get a Eye Lid Quote in 12 Hours
Tell us your vehicle — our engineering team confirms mold availability, pricing and lead time.
Factory-Direct Carbon Fiber,
Built for You
Custom parts engineered and manufactured in-house — from one-off samples to bulk orders.
19+ Years Manufacturing
1,000 Parts / Day Capacity
Reply within 12 Hours
Free quote · No obligation · Takes about 1 minute
In a hurry? Chat on WhatsApp →
Working hours: Monday – Saturday, 9:00 – 18:00 (GMT+8)