Custom Carbon Fiber Aprons — In Stock, or Built on Existing Molds
33+ existing apron molds covering BMW, Mercedes-Benz, Audi, Porsche and more. Front and rear apron sections that reshape the bumper line without replacing the bumper. No tooling fee on catalog designs — pick your material, weave, color and finish. Need something that doesn't exist yet? We develop new molds from your drawings or a 3D scan.
15+Existing apron molds by model
7–15 daysProduction on existing molds
45–58 daysFirst sample on new tooling
12 hrsEngineering reply time
Find an Apron With an Existing Mold
33 apron designs with existing molds — filter by your brand. Every catalog piece can be customized in material, weave, color and finish with no tooling fee. Don't see your model? We build new molds from your drawings or a 3D scan.
Pricing
How Much Is a Carbon Fiber Apron?
Retail $300–$900 elsewhere. Factory-direct pricing depends on which of the three paths fits your project.
📦 In Stock
3–7 days
- Ships from US / EU warehouse
- Single piece or combined parcels
- Live stock & regional price confirmed before ordering
Most Popular
🎨 Existing Mold
$150–$400 / pc
- No tooling fee — mold already exists
- Custom weave, color & finish
- Production 7–15 days after order
🛠️ New Mold
Tooling $800–$2,000
- Full custom development from your drawings
- First sample in 45–58 days
- Recommended batch: 20 pcs — lowest unit cost
🚢 Aprons ship in reinforced flat cartons with foam edge protection. Sea freight default for batches; air freight available for urgent pieces.
📄 Read the full carbon fiber apron pricing guide — retail vs factory vs tooling →Why Carbon
Why Carbon Fiber Aprons — and What to Look For
An apron reshapes the lower bumper line — front or rear — without the cost and shipping volume of a full bumper replacement. It is the middle path between a lip and a full bumper swap.
Aprons wrap corners, so contour accuracy decides whether the panel gap looks OEM. Our molds follow the bumper curvature of each specific model, with multi-layer UV-stable clear coat as standard.
Bumper-contour molds
Following the exact curvature of each bumper variant
Front & rear sections
Lower valances, corners and full wrap sections
UV-stable clear coat
Anti-yellowing formula, standard on all exterior parts
Customization
What You Can Customize on an Apron
Front vs Rear Sections
Lower front valances, rear apron inserts and corner sections — matched to the bumper variant.
With or Without Exhaust Cutouts
Rear aprons cut for your exhaust layout — tell us tip count and diameter.
Kit Matching
Weave and finish matched to lips, skirts and diffusers ordered as a set.
Wet vs Dry Carbon
Wet carbon for street value; prepreg dry carbon for track weight savings.
Weave & Color
2×2 twill, 1×1 plain, forged carbon, Kevlar blends — matched across the kit.
Finish
High-gloss or matte/satin clear coat. Order matte if you plan to paint-match the apron.
Before You Order
Fitment, Installation & Safety Notes
Installation: aprons clip, tape and screw to the factory bumper — 30–60 minutes. Rear aprons on some models require bumper loosening for clip access; the install sheet shows the sequence.
Exhaust check (rear): confirm tip diameter and layout against the cutout spec — aftermarket exhausts often differ from stock.
Paint & PPF: clear-coated carbon can be PPF-wrapped like paint. Aprons are frequently paint-matched with carbon accents — order matte for best paint adhesion.
📖 Browse all carbon fiber installation guides →Three Ways to Work With Us
Pick the Path That Fits Your Business
01
In-Stock Products
Overseas warehouse, ready to ship. Single piece or many — we pack and hand over to the carrier.
02
Made From Existing Molds
No tooling fee. Customize material, weave, color and finish on any catalog apron; production starts on order.
Browse the 33 designs above ↑03
New Mold Development
OEM / ODM from your drawings or 3D scan. MOQ from 20 units per part; private label available.
See the development process →FAQ
Carbon Fiber Aprons Questions
Apron vs full bumper — which do I need?
An apron reshapes the lower section and keeps the factory bumper; a replacement bumper changes the whole unit. Aprons ship cheaper and install faster.
Is it a direct fit?
Existing-mold aprons follow the bumper contour and use factory mounting points plus supplied hardware. No cutting on the car.
Will a rear apron clear my exhaust?
Order the cutout variant matching your tip count and diameter. Custom cutouts are possible on new tooling.
Which models already have molds?
15 models across 4 brands — BMW, Mercedes-Benz, Volkswagen and more. Filter the catalog above, or send us your model and we will confirm within 12 hours.
How is an apron shipped?
In reinforced flat cartons with foam edge protection. Sea freight default for batches; air for urgent pieces.
What is the MOQ for existing-mold customization?
No strict MOQ on catalog designs — one piece is fine. Best unit cost starts around 20 pcs, and mixed parts count toward the batch.
15 Models Already Have Apron Molds. Is Yours One of Them?
Send us your brand, model and year — we confirm mold availability and pricing within 12 hours. No mold? New tooling starts at $800–$2,000.
Start Your Project
Get a Apron Quote in 12 Hours
Tell us your vehicle — our engineering team confirms mold availability, pricing and lead time.
Factory-Direct Carbon Fiber,
Built for You
Custom parts engineered and manufactured in-house — from one-off samples to bulk orders.
19+ Years Manufacturing
1,000 Parts / Day Capacity
Reply within 12 Hours
Free quote · No obligation · Takes about 1 minute
In a hurry? Chat on WhatsApp →
Working hours: Monday – Saturday, 9:00 – 18:00 (GMT+8)